Behringer U-Control UCA222

Страничка на сайте производителя: https://www.behringer.com/product.html?modelCode=0805-AAG

ASIO driver: behringer_2902_x64_2.8.40.zip (на сайте производителя его нет, тем рекомендуют стандартный драйвер + ASIO4ALL).

Подходит драйвер, однако, не для всех устройств U-Control UCA222, как сообщают на форуме gearspace.com:

It seems that Behringer stopped using the original Texas Instruments PCM2902 and started using an cheaper equivalent from CoolAudio (v2902). My guess is that it changed the id that is used by the installer to recognize the connected device. The original Behringer ASIO driver only recognized the hardware ids USB\VID_08BB&PID_2900 and USB\VID_08BB&PID_2902.
You can check the codes of the non-working UCA222 by connecting them to your computer, running dxDiag and going to the sound tab of the UCA222 and look for the hardware id. If it is not one of those two, then that is the reason. One alternative you have, then (besides ASIO4ALL) is the multi-brand ploytec driver. They have a free demo (which beeps every 30 seconds), but the commercial one costs 49€…
Another alternative would be adding the corresponding new hardware ids to the busb2902.inf file, although it most likely will not work. I tried with an unbranded chinese device with a PCM2704C and it failed, while with the ploytec driver it worked.

Панель управления драйвера