Вячеслав Булынкин

WAVGAT Nodemcu WIFI Network Development Board Based ESP8266
RobotDyn 4-Digit LED 0.56″ Display Tube GREEN (clock, double dots), 7-segments, TM1637, disp. size 50x19mm
С этим не работает, то ли железка дохлая, то ли код кривой - PCF8563 IIC Real Time Clock RTC Module Board For Arduino

Схема выводов NodeMCU:

Дисплей:

Драйвер - https://github.com/nodemcu/nodemcu-devkit/tree/master/Drivers

Прошиватор, идёт вместе с прошивкой: https://github.com/nodemcu/nodemcu-flasher/archive/master.zip
Запускать Win64\Release\ESP8266Flasher.exe.
Arduino IDE: https://www.arduino.cc/en/Main/Software

Arduino IDE → Preferences → Boards Manager URLs, добавить ссылку
http://arduino.esp8266.com/stable/package_esp8266com_index.json, нажать OK.
Далее Tools → Boards → Boards Manager
В поле поиска вставьте esp8266, выберите ESP8266 Community и нажмите кнопку Установить

Начало работы с ESP8266

Взят отсюда: https://steve.fi/Hardware/d1-ntp-clock/

В Arduino IDE нужно скачать библиотеку поддержки дисплея Grove 4-digit display by Seeed Studio (поиск по 1637), библиотеку WiFiManager (её можно закомментировать в коде и не ставить), а также библиотеку времени Time (в репозитории не нашёл, качал вручную, папку нужно класть в %userprofile%\Documents\Arduino\libraries).

Изменения:

• Часовой пояс изменён на московский (+3)
• NTP-сервер заменён на pool.ntp.org
• Ноги для дисплея заменены на CLK D6 (GPIO12), DIO D5 (GPIO14).
• Яркость дисплея выставлена на BRIGHT_TYPICAL (2 из диапазона 0-7)
• Синхронизация с сервером - раз в 129600 сек (36 часов), как рекомендовано в NTP Pool Project Terms of Service for End-Users.

ntp-clock.ino

//   NTP-Based Clock - https://steve.fi/Hardware/
//
//   This is a simple program which uses WiFi & an 4x7-segment display
//   to show the current time, complete with blinking ":".
//
//   Steve
//   --
//
 
 
//
// WiFi & over the air updates
//
#include <ESP8266WiFi.h>
#include <ArduinoOTA.h>
 
//
// NTP uses UDP.
//
#include <WiFiUdp.h>
 
//
// The display-interface
//
#include "TM1637.h"
 
//
// Time & NTP
//
#include "TimeLib.h"
 
 
//
// The name of this project.
//
// Used for:
//   Access-Point name, in config-mode
//   OTA name.
//
#define PROJECT_NAME "NTP-CLOCK"
 
 
//
// The timezone - comment out to stay at GMT.
//
#define TIME_ZONE (+3)
 
//
// Should we enable debugging (via serial-console output) ?
//
// Use either `#undef DEBUG`, or `#define DEBUG`.
//
#define DEBUG
 
 
//
// If we did then DEBUG_LOG will log a string, otherwise
// it will be ignored as a comment.
//
#ifdef DEBUG
#  define DEBUG_LOG(x) Serial.print(x)
#else
#  define DEBUG_LOG(x)
#endif
 
 
 
 
//
// Use the user-friendly WiFI library?
//
// If you do not want to use this then comment out the following line:
//
#define WIFI_MANAGER
 
//
//  Otherwise define a SSID / Password
//
#ifdef WIFI_MANAGER
# include "WiFiManager.h"
#else
# define WIFI_SSID "ssid"
# define WIFI_PASS "password"
#endif
 
 
//
// UDP-socket & local-port for replies.
//
WiFiUDP Udp;
unsigned int localPort = 2390;
 
 
//
// The NTP-server we use.
//
static const char ntpServerName[] = "pool.ntp.org";
 
 
//
// Pin definitions for TM1637 and can be changed to other ports
//
#define CLK D6
#define DIO D5
TM1637 tm1637(CLK, DIO);
 
 
 
//
// This function is called when the device is powered-on.
//
void setup()
{
    // Enable our serial port.
    Serial.begin(115200);
 
    // initialize the display
    tm1637.init();
 
    // We want to see ":" between the digits.
    tm1637.point(true);
 
    //
    // Set the intensity - valid choices include:
    //
    //   BRIGHT_DARKEST   = 0
    //   BRIGHT_TYPICAL   = 2
    //   BRIGHT_BRIGHTEST = 7
    //
    tm1637.set(BRIGHT_TYPICAL);
 
    //
    // Handle WiFi setup
    //
#ifdef WIFI_MANAGER
 
    WiFiManager wifiManager;
    wifiManager.autoConnect(PROJECT_NAME);
 
#else
    //
    // Connect to the WiFi network, and set a sane
    // hostname so we can ping it by name.
    //
    WiFi.mode(WIFI_STA);
    WiFi.hostname(PROJECT_NAME);
    WiFi.begin(WIFI_SSID, WIFI_PASS);
 
    //
    // Show that we are connecting to the WiFi.
    //
    DEBUG_LOG("WiFi connecting: ");
 
    //
    // Try to connect to WiFi, constantly.
    //
    while (WiFi.status() != WL_CONNECTED)
    {
        DEBUG_LOG(".");
        delay(500);
    }
 
    //
    // Now we are connected show the local IP address.
    //
    DEBUG_LOG("\nWiFi connected ");
    DEBUG_LOG(WiFi.localIP());
    DEBUG_LOG("\n");
 
#endif
 
    //
    // Ensure our UDP port is listening for receiving NTP-replies
    //
    Udp.begin(localPort);
 
 
    //
    // But now we are done, so we will setup the clock.
    //
    // We provide the time via NTP, and resync every 36 hours,
    // as recommended at https://www.pool.ntp.org/tos.html
    // This is more than enough in most cases.
    //
    setSyncProvider(getNtpTime);
    setSyncInterval(129600);
 
    //
    // The final step is to allow over the air updates
    //
    // This is documented here:
    //     https://randomnerdtutorials.com/esp8266-ota-updates-with-arduino-ide-over-the-air/
    //
    // Hostname defaults to esp8266-[ChipID]
    //
    ArduinoOTA.setHostname(PROJECT_NAME);
 
    ArduinoOTA.onStart([]()
    {
        DEBUG_LOG("OTA Start\n");
    });
    ArduinoOTA.onEnd([]()
    {
        DEBUG_LOG("OTA End\n");
    });
    ArduinoOTA.onProgress([](unsigned int progress, unsigned int total)
    {
        char buf[16];
        memset(buf, '\0', sizeof(buf));
        snprintf(buf, sizeof(buf) - 1, "Upgrade - %02u%%          ", (progress / (total / 100)));
        DEBUG_LOG(buf);
        DEBUG_LOG("\n");
    });
    ArduinoOTA.onError([](ota_error_t error)
    {
        DEBUG_LOG("Error - ");
        DEBUG_LOG(error);
        DEBUG_LOG(" ");
 
        if (error == OTA_AUTH_ERROR)
            DEBUG_LOG("Auth Failed\n");
        else if (error == OTA_BEGIN_ERROR)
            DEBUG_LOG("Begin Failed\n");
        else if (error == OTA_CONNECT_ERROR)
            DEBUG_LOG("Connect Failed\n");
        else if (error == OTA_RECEIVE_ERROR)
            DEBUG_LOG("Receive Failed\n");
        else if (error == OTA_END_ERROR)
            DEBUG_LOG("End Failed\n");
    });
 
    //
    // Ensure the OTA process is running & listening.
    //
    ArduinoOTA.begin();
 
 
}
 
 
 
//
// This function is called continously, and is responsible
// for flashing the ":", and otherwise updating the display.
//
// We rely on the background NTP-updates to actually make sure
// that that works.
//
void loop()
{
    static char buf[10] = { '\0' };
    static char prev[10] = { '\0' };
    static long last_read = 0;
    static bool flash = true;
 
    //
    // Get the current hour/min
    //
    time_t nw   = now();
    int cur_hour = hour(nw);
    int cur_min  = minute(nw);
 
    //
    // Format them in a useful way.
    //
    sprintf(buf, "%02d%02d", cur_hour, cur_min);
 
    //
    // If the current "hourmin" is different to
    // that we displayed last loop ..
    //
    if (strcmp(buf, prev) != 0)
    {
        // Update the display
        tm1637.display(0, buf[0] - '0');
        tm1637.display(1, buf[1] - '0');
        tm1637.display(2, buf[2] - '0');
        tm1637.display(3, buf[3] - '0');
 
        // And cache it
        strcpy(prev , buf);
 
    }
 
 
    //
    // The preceeding piece of code would
    // have ensured the display only updated
    // when the hour/min changed.
    //
    // However note that we nuke the cached
    // value every second - solely so we can
    // blink the ":".
    //
    //  Sigh
 
    long now = millis();
 
    if ((last_read == 0) ||
            (abs(now - last_read) > 1000))
    {
        // Invert the "show :" flag
        flash = !flash;
 
        // Apply it.
        tm1637.point(flash);
 
        // However note that the ":" will not redraw
        // unless/until you update.  So we will
        // force that to happen.
        memset(prev, '\0', sizeof(prev));
        last_read = now;
    }
}
 
 
 
/*-------- NTP code ----------*/
 
const int NTP_PACKET_SIZE = 48; // NTP time is in the first 48 bytes of message
byte packetBuffer[NTP_PACKET_SIZE]; //buffer to hold incoming & outgoing packets
 
time_t getNtpTime()
{
    IPAddress ntpServerIP;
 
    // discard any previously received packets
    while (Udp.parsePacket() > 0) ;
 
    DEBUG_LOG("Initiating NTP sync\n");
 
    // get a random server from the pool
    WiFi.hostByName(ntpServerName, ntpServerIP);
 
    DEBUG_LOG(ntpServerName);
    DEBUG_LOG(" -> ");
    DEBUG_LOG(ntpServerIP);
    DEBUG_LOG("\n");
 
    sendNTPpacket(ntpServerIP);
 
    delay(50);
    uint32_t beginWait = millis();
 
    while ((millis() - beginWait) < 5000)
    {
        DEBUG_LOG("#");
        int size = Udp.parsePacket();
 
        if (size >= NTP_PACKET_SIZE)
        {
 
            DEBUG_LOG("Received NTP Response\n");
            Udp.read(packetBuffer, NTP_PACKET_SIZE);
 
            unsigned long secsSince1900;
 
            // convert four bytes starting at location 40 to a long integer
            secsSince1900 = (unsigned long)packetBuffer[40] << 24;
            secsSince1900 |= (unsigned long)packetBuffer[41] << 16;
            secsSince1900 |= (unsigned long)packetBuffer[42] << 8;
            secsSince1900 |= (unsigned long)packetBuffer[43];
 
            // Now convert to the real time.
            unsigned long now = secsSince1900 - 2208988800UL;
 
#ifdef TIME_ZONE
            DEBUG_LOG("Adjusting time : ");
            DEBUG_LOG(TIME_ZONE);
            DEBUG_LOG("\n");
 
            now += (TIME_ZONE * SECS_PER_HOUR);
#endif
 
            return (now);
        }
 
        delay(50);
    }
 
    DEBUG_LOG("NTP-sync failed\n");
    return 0;
}
 
// send an NTP request to the time server at the given address
void sendNTPpacket(IPAddress &address)
{
    // set all bytes in the buffer to 0
    memset(packetBuffer, 0, NTP_PACKET_SIZE);
 
    // Initialize values needed to form NTP request
    // (see URL above for details on the packets)
    packetBuffer[0] = 0b11100011;   // LI, Version, Mode
    packetBuffer[1] = 0;     // Stratum, or type of clock
    packetBuffer[2] = 6;     // Polling Interval
    packetBuffer[3] = 0xEC;  // Peer Clock Precision
 
    // 8 bytes of zero for Root Delay & Root Dispersion
    packetBuffer[12] = 49;
    packetBuffer[13] = 0x4E;
    packetBuffer[14] = 49;
    packetBuffer[15] = 52;
 
    // all NTP fields have been given values, now
    // you can send a packet requesting a timestamp:
    Udp.beginPacket(address, 123); //NTP requests are to port 123
    Udp.write(packetBuffer, NTP_PACKET_SIZE);
    Udp.endPacket();
}